Bambu Lab H2C Induction Hotend (Right)

€47.99 Inc. VAT

The Bambu Lab Vortek Induction Hotend (Right) is designed for the H2C series, featuring advanced induction heating technology that brings the nozzle to printing temperature in approximately 8 seconds (PLA Basic). Its contactless connection ensures reliable operation and precise temperature control. It supports AMS integration for multi-colour printing and is compatible with TPU 85A filament.

SKU: BAMBU-INDUCTIONHOTENDRIGHT/H2C Category:

Compatibility

H2C and H2C Laser

Bambu Lab Vortek System

The Bambu Lab Vortek System takes multi-material 3D printing to the next level with up to six interchangeable, induction-heated hotends. Its innovative hotend-swapping mechanism enables efficient material and colour changes while significantly reducing purge waste compared to traditional single-nozzle systems. When printing with fewer than seven filament types on the H2C, it eliminates the need for purge flushing during filament changes, saving both material and printing time.

Efficient Multi-Material Printing with Less Waste

Featuring up to six interchangeable hotends, the Vortek System allows different materials and colours to be assigned to individual hotends. By physically switching hotends instead of flushing filament through a single nozzle, it significantly reduces material waste and streamlines multi-material printing workflows.

Fast and Precise Induction Heating

The Vortek Induction Hotend heats up to printing temperature in approximately 8 seconds (PLA), enabling faster material transitions and reducing waiting time during filament changes. Built-in overheat, overvoltage, short-circuit, and open-circuit protection ensure safe and reliable operation throughout extended printing sessions.

Stable Contactless Connection

Unlike traditional contact-based metal pins, which can oxidize and deteriorate over time, the Vortek System uses a contactless, high-frequency power and signal interface. This provides a stable and durable connection, supporting precise temperature control and synchronized hotend operation.

Intelligent Heatsink Temperature Monitoring

Equipped with dual temperature sensors, the system continuously monitors both nozzle and heatsink temperatures. If the heatsink temperature exceeds safe operating limits, the cooling system automatically increases its performance to prevent heat creep and minimize the risk of nozzle clogging.

Smart Multi-Hotend Management

Each Vortek Hotend stores its filament information locally, enabling accurate material identification and reducing the risk of loading errors. When working with more than seven filament types, the system intelligently optimizes hotend assignments to minimize purge waste and improve printing efficiency.

Filament Compatibility

For detailed information about supported materials and printing requirements, refer to the Bambu Lab Filament Compatibility Guide.

Important Usage Notes

  • For single-colour printing, using the Fixed Hotend (Induction Hotend) is recommended.
  • For multi-colour printing with the AMS, connect the AMS to the right-side Fixed Hotend.
  • When using the second hotend for support materials, the Liftable Hotend is recommended.
  • TPU 85A is supported only on the right-side Fixed Hotend. TPU 95A HF / 90A is expected to be supported on the left-side Liftable Hotend starting from firmware version U2.
  • PET-CF, PPA-CF, and PPS-CF are supported only on the left-side Liftable Hotend.
  • Carbon fibre (CF) and glass fibre (GF) reinforced filaments are not compatible with stainless steel nozzles.