Bambu Lab A1 Mini Combo
€529.00 Original price was: €529.00.€499.00Current price is: €499.00. Inc. VAT
The Bambu Lab A1 Mini 3D Printer redefines flow control in FDM 3D printing, changing the game. It measures nozzle pressure precisely by using a high-frequency, high-resolution eddy current sensor. You receive the A1 mini precisely pre-assembled, pre-squared, and pre-tuned. You may set up for your first print in as little as 20 minutes. This combo-set includes the brand-new, dependable, and attractive AMS lite, enabling anyone to print multicolored 3D models.
Highlights
- Plug-N-Play Convenience
- Active Flow Rate Compensation
- Full Auto Calibration
- Active Motor Noise Cancelling
- High-Speed Precision
- Active Flow Rate Compensation
- 180 x 180 x 180 mm Maximum Build Volume
- Full-metal Linear Rails and Bearings
- Includes AMS Lite
2 in stock
Full-Auto Calibration
A1 mini handles various calibrations all by itself. For EVERY print job, it automatically and carefully calibrates the Z-offset, bed-level, vibration resonance, and nozzle pressure.
Auto Z-Offset
To determine the exact z-offset, the A1 mini uses its nozzle to probe the bed. No need to stick a paper as reference.
Auto Vibration Calibration
A1 mini’s toolhead and heatbed are equipped with sensors. One of the very first bed-slinger printers to run auto resonance calibration on both X & Y axes.
Auto Flow Dynamics
The nozzle pressure based flow dynamics calibration method is executed by the A1 mini, the first of its type. The A1 mini manages Pressure Advanced calibration automatically, so there’s no need to manually pick and match or design any patterns.
Auto Belt Tension
By calibrating the vibration frequency, the A1 mini can automatically check the belt tension. The HMS system will alert you to use the auto belt tensioner to adjust the belt tension if it is loose.
Print Smooth At Every Corner, Always
The A1 mini transforms 3D printing flow control. The pressure inside the nozzle is measured by means of a high-resolution, high-frequency eddy current sensor. In order to extrude precisely, our algorithm actively adjusts the flow rate based on the readings.
High-speed Precision
Full-metal Rails, Rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and above all, an advanced motion control system that utilizes these features to print a 14-minute benchy with quality and following all the speed benchy rules straight out of the box without using specialized filaments.
Quick Swap Nozzles
All-new quick swap hotend design, the hotend pops in and out with just 1 clip.
Print Silently
The A1 mini is one of the quietest 3D printers available, so you can nap while your printer is working hard. Its Active Motor Noise Canceling and Silent Mode can reduce noise to under 48 dB.
Build Volume(W*D*H) | 180*180*180 mm³ |
Toolhead Hot End | All-Metal |
Nozzle | Stainless Steel |
Max Hot End Temperature | 300 °C |
Nozzle Diameter | 0.4 mm (Included) |
Heatbed Build Plate | Bambu Textured PEI Plate (Included) |
Max Build Plate Temperature | 80°C |
Speed Max Speed of Tool Head | 500mm/s |
Max Acceleration of Tool Head | 10000mm/s² |
Supported Filament | PLA, PETG, TPU, PVA Ideal |
Sensors Monitoring Camera | Low Framerate Camera (Up to 1080P) |
Timelapse | Supported |
Filament Run Out Sensor | Yes |
Filament Odometry | Yes |
Power Loss Recover | Yes |
Filament Tangle Sensor | Yes |