Creality Space π Plus Filament Dryer
€99.00 Inc. VAT
Wet 3D printing filament can result in stringing clogging, poor adhesion and layer shifting, this these problems will be more obvious in high-speed printing scenarios. The Creality Space π Plus Filament Dryer solves these issues by drying the filament during the printing process itself, enhancing your 3D model quality and minimizing the influence of external environmental factors.
Features & Advantages
⋅ Two rolls capacity, double drying ⋅ Double 360° hot air heating ⋅ 4 inch LCD touch screen
⋅ Adjustable Temperature 45°C – 70°C ⋅ One-key set for 12 Filaments ⋅ Real-time humidity & temperature monitoring
1 in stock
The filament is dried by the Creality Space Pi Plus Filament Dry Box while printing, preventing moisture absorption from outside environmental influences. This guarantees superior quality and avoids stringing, clogging, inadequate adhesion, or layer shifting.
Double 360° hot air heater with PTC heating technology
For even heating, the dry box is equipped with a fan that circulates the hot air at a 360° angle to effectively dry damp filaments. The system is supported by a long-lasting and energy-saving 110-watt PTC heating element.
LCD touch screen
The Creality Space Pi Plus Filament Dry Box is equipped with a user-friendly and easy-to-use 4-inch touchscreen for monitoring drying conditions. The drying countdown, the real-time temperature and the real-time humidity can be tracked on the display.
Two Rolls Capacity Design
It contains 2 rolls of 1 kg filaments and is also equipped with 4 filaments holes and PTFE pipes to meet the needs of users drying a wide range of filaments as well as 2 printers at the same time.
One-key set for 12 filament types with 48 hour timer function
The filament dry box has 12 different temperature settings for different filament types. The temperature can be freely adjusted between 45 °C and 70 °C. The heating duration can also be freely adjusted from 0 to 48 hours.
Power-off memory function
In the event of an unforeseen power outage, the device can be easily restarted as it remembers the previous material and temperature settings.
Other features
⋅ Compatible with 1.75mm and 2.85mm filaments
⋅ Supports high-speed 3D printers and filaments from the Hyper series and K1 series (recommended)
⋅ Easy switching between °C and °F
⋅ Safety through power switch
⋅ Moisture-proof silicone plug
⋅ Input voltage of 220V 50/60Hz, rated power of 260W
► Suitable for spools with a diameter of 20 cm and a width of 7.9 cm